UNIST

THRU-THE-TOOL® Powercool System for water-soluble fluids

• Only mist coolant system of its kind for fixed machine tools using coolant inducers or hollow spindles with water-soluble fluids. Lets you apply coolant directly at the tool-work interface. Expanded compressed air cools tooling and helps remove chips from the cutting interface. The mist coolant lubricates flutes, holes and chips to improve hole quality.
• Operates with single air supply source at 80-100 psi. System feeds coolant from the supply tank to the control station and then in regulated amounts through a co-axial hose to the coolant inlet at the tool or spindle.
• Dispenses water-soluble coolants to reduce heat. Water vapor evaporation absorbs heat so tool cools faster. Water-soluble coolants are also used to maintain compatibility with flood coolants used on the same machine.
• Offers choice of 2-, 6- or 15-gallon tank capacity. A central lubricant supply tank can feed numerous control stations. Contact us to engineer an efficient solution for your operation.
• Refills quickly and easily. Three-way sleeve valve depressurizes the tank for quick refilling.
• Offers choice of actuation valves: manual valve, solenoid valve or air pilot valve. A flow-sensing valve is available for automatic operation with portable air tools.
• Cools tools faster. UNIST will build one to match your machining demands. Contact us today.

Powercool applications:

• Fixed machine tools using
  • Coolant inducers
  • Hollow spindles

Read more about the Powercool System. Download now.