Powered uni-Roller^™ cuts blank stock lubrication costs from 50 to 80%

Applies exact amount of fluid needed to lubricate blank stock when combined with a SPR-2000 or SPR-2000-JR programmable fluid controller.
Dispenses lubricant evenly across the inside of the roller. Inside each of the rollers there is a dispenser tube with holes spaced along its length. As the fluid controller injects lubricant into the tube, the lubricant is dispersed evenly across the inside of the roller.
Covers smoothly and evently coat both top and bottom of the blank. Lubricant is transferred through the perforated stainless steel roller to a durable polyester felt or polyurethane foam cover.
Comes in two styles :
Up to 18 inches (457 mm) wide: Powered uni-Roller system’s compact drive arrangement and single roller design fits in limited spaces. Comes with a 1/17 horsepower DC gear motor that directly drives the lower roller at speeds up to 200 feet per minute (61 m/minute).
Wider than 18 inches (457 mm) wide: uses a timing belt to drive the lower roller at speeds up to 145 feet per minute (44 m/minute). Each system features multiple 12-inch (305 mm) rollers that are staggered and overlap. This design controls the lubricant application in zones and allows unit sizes beyond the maximum 58-inch (1422 mm) standard width.
Saves you 50 to 80% on lubrication costs. We'll provide a system that drives down lubrication costs in your application. Contact us today.

Read more in the Metalforming Lubrication Systems brochure. Download now.

UNIST